Folger Tech FT-5 Large Scale 3D Printer Kit


      • Print Area: 300x300x~400mm (12x12x15.75") Build area
      • Printer Size: 740mmx500mmx540mm
      • Power: 360w 12V system CE rated Power Supply, can use 110v or 220v
      • Max Extruder Temp: 245C (can reach higher but will shorten the longevity of the extruder)
      • Max Bed Temp: 100C
      • X/Y Linear Rail System
      • Z T8 4 Start  Lead screws
      • Controller: MKS Gen 1.4
      • Resolution: 0.05mm (50 Microns)
      • Max Stable Speed: TBA
      • 12V Heated Bed
      • SHIPPING WEIGHT 45lbs! (21kg)




      Buyers who select the June 10th ship date will get the CNC add on as soon as it is released at $50 + Shipping costs.

      ** As we receive customer feedback we do make small alterations to the kit if we feel they improve the kits performance and stability, the kit you receive might reflect some of these slight changes and improvements.

      The Folger Technologies FT-5 is a great kit combining the simplicity of an erector set with the power of a much more expensive desktop printer. The kit comes with everything you need to assemble the machine with the use of a few simple tools and a little bit of time you too can get started 3D printing the world's next big idea. 

      The highlights of this kits are the massive 300x300x400mm (12x12c15.75") build area, Linear rails on the X and Y movements. Dual Y and Z motors for added speed and power. This kit also includes an aluminum build surface/headed bed capable of printing many materials including PLA and ABS.

      This kit includes the following:

      • 2004 LCD with SD card Reader
      • Laser cut Frame (Melamine ) 

      • x4 LMF8LUU Linear Bearings

      • x8 SK8 Mounts
      • x4 KP08 bearings

      • x3 Idler Pulley

      • 4x 8mm Chromed Linear Rod for  Z (Pre-Cut)

      • 2x T8 4 Start Lead Screw 8mm pitch 

      • x1 300mmx300mm Heated Bed

      • x1 Direct Drive Extruder w/ Injection Molded Parts for 1.75mm ABS/PLA/Wood/HIPS/PETG 

      • 360W 12v 30A Power Supply

      • x6 NEMA 17 5.0kg/cm Stepper Motors

      • 3x 400mm 12mm Linear Rails
      • x3 Meters of GT2 Belt

      • x2 GT2-188 Belt
      • x7 20 Tooth Pulleys

      • x1 MKS Gen 1.4 Controller

      • x5 A4988 Stepper Drivers 

      • x1 Roll of 8mm Kapton Tape

      • x3 Electronic End Stop Circuits w/ LED

      • x3 Belt Tensioners

      • x8 Threaded Bed Adjustment Knobs

      • x8 Bed Springs

      • All Required Nuts/Bolts for Assembly

      • Power Cable


      • Impressive 300mmx300mmx~400mm Build Area

      • Able to print ABS & PLA Plastic (1.75mm)

      • Can run 110V or 220V (Only Comes With US Cord)

      Items you will need:

      • Tools

      • Filament

      • Time

      Build Guide and Firmware/Software:
      ** Please note the items included inside the below link are often updated to include new and updated information so please bookmark it for your records.
      Other items you might be interested in buying with your kit:
      This is a kit of components for assembly into a 3D Printer by the end user. Building and using the printer is potentially very dangerous as it involves electricity and high temperatures.

      Building the printer will require a certain amount of physical dexterity, common sense and a thorough understanding of what you are doing. We have provided fully comprehensive build documentation to enable you to build your Folger Tech 3D Printer Kit in a safe manner.

      However ultimately we cannot be responsible for your health and safety whilst building or operating the printer, with that in mind be sure you are confident with what you are doing prior to commencing with building or buying. Read all of the manual to enable you to make an informed decision.

      Building and operating involves electricity, so all necessary precautions should be taken and adhered to, the printer runs on 12V supplied by a certified power supply, so you shouldn't ever have to get involved with anything over 12V but bear in mind there can still be high currents involved and even at 12V they shouldn't be taken lightly.

      High temperatures are involved with 3D Printing, the Extrusion nozzle of the hot end runs at 230°C, the heated bed runs a 110°C and the molten plastic extruded will initially be at around 200°C, so special care and attention should be made when handling these parts of the printer during operation.

      We wouldn't recommend leaving your printer running unattended.We cannot be held responsible for any loss, damage, threat, hurt or other negligent result from either building or using the printer.